Triple Clamp Measurement
4. Lay straight edge against
tubes
1. Measure
between
insides of
tubes
2. Add 1x
tube OD
3. Resulting measure is
the C-to-C
fork spacing
5. Measure
from
straight edge
to OD of
fork stem
hole in triple
clamp
6. Measure fork stem hole ID & divide by 2
7. Divide fork tube OD measure by 2
8. To the measurement in step 5 add the
measurement in step 6 and subtract the
measurement in step 7
9. Resulting measure is the
fork offset